| 0-5 VDC Output Signal |
Minimum 2.5K ohm load
Not isolated |
| Accuracy (including linearity) |
±1.5% Full Scale (10-100% rated flow) |
| Body Leak Integrity (not including fittings) |
1 x 10-7 sccs of He |
| Certifications |
CE Approved
89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage Directive |
| Compatible Gases |
Clean, dry gases compatible with wetted materials |
| Electrical Connections |
Integrated 36" (92 cm) cable, terminated with:
Standard: 6-pin Mini-DIN (PS/2 Style)
D1 Option: 9-pin D-Sub male
D2 Option: 15-pin D-Sub male |
| Fitting Material |
Choose from acetal, brass, or stainless steel |
| Integrated Display |
None |
| O-Ring Material |
None |
| Peak Power Consumption |
Standard: 12VDC @ 300 mA (12.5-15VDC)
E Suffix: 24VDC @ 160 mA (22-25VDC) |
| Pressure Rating |
500 psig (34.5 bar) |
| Pressure Sensitivity |
±0.02% Full Scale per psi (per 69 mbar) |
| Ratings |
NEMA 1 (IP10) |
| Recommended Filtration |
20 microns or less
Optional inline filters available |
| Reliability |
100,000 Hours MTBF (testing ongoing) |
| Repeatability |
±0.25% Full Scale (10-100% rated flow) |
| Settling Time |
Typically <1 second for 97% of final value |
| Temperature Rating |
Operating: 5 to 55șC
Storage: 0 to 70șC |
| Temperature Sensitivity |
±0.15% F.S. or less per șC |
| Typical Power Consumption |
Standard: 12VDC @ 150 mA (12.5-15VDC)
E Suffix: 24VDC @ 80 mA (22-25VDC) |
| Warm-Up Time |
Less than 5 minutes |
| Warranty |
1 year limited |
| Wetted Materials |
303 Stainless Steel
304 Stainless Steel
316 Stainless Steel
Epoxy |
