McMillan Model 50S Mass Flow Meters are constructed from stainless steel and are capable of measuring virtually any clean, dry gas as low as 0-20 sccm or as high as 0-100 L/minute.
McMillan Model 50S Mass Flow Meters are constructed from stainless steel and are capable of measuring virtually any clean, dry gas as low as 0-20 sccm or as high as 0-100 L/minute. Repeatable results are achieved using a patented thermal mass flow sensor design. This proven design minimizes zero drift while maintaining fast response and linear outputs.
Because of the compact size and economical cost of these products, the Model 50S Mass Flow Meters are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications.
Thermal mass flow meters feature fast response, virtually zero maintenance, and precise measurement. These are essential qualities for today’s variety of applications.
Flow ranges from 0-20 sccm up to 0-100 L/minute are available. Consult the factory for custom requirements.
Units may be ordered to operate with either 12 VDC or 24 VDC power. Various power adapters are available for use with 12 VDC versions.
Choose from either 0-5VDC or 4-20mA linear outputs.
All models have a standard accuracy specification of ±1.5% F.S. accuracy (including linearity). NIST traceable calibration certificates are optional on some models.
All units have compression-type tube fittings as standard. Consult Product Configurator for available materials and sizes.
All units have a 36” (92 cm) output cable, terminated with a 6-pin PS/2 style connector. An optional mating cable assembly, terminated with pigtail leads, is recommended to facilitate wiring.
50S units feature stainless steel construction. See specifications for detailed materials in gas path.
Units without integrated displays may be used with McMillan’s line of external remote displays. Please request additional information from factory on remote displays available.
Units may be calibrated for virtually any clean, dry gas. Several non-standard gas selections are available as indicated in the Product Configurator. Contact factory for calibration information on non-standard gases.
Typical Pressure Drop
±1.5% Full Scale
±0.25% Full Scale
500 psig (34.5 barg)
±0.02% Full Scale per psi (per 69 mbar)
Operating Range: 10 to 50ºC
Storage Range: 0 to 70ºC
±0.15% F.S. or less per ºC
1 x 10-7 sccs of He
303 Stainless Steel
304 Stainless Steel
316 Stainless Steel
Epoxy
Stainless Steel
20 microns or less
Clean, dry gases compatible with wetted materials
Minimum 2.5 Kohm load
Maximum 300 ohm loop resistance
Less than 5 minutes
none
Suffix B: 22-25VDC
Suffix C: 15-25 VDC
Suffix D: 12-15 VDC
120 mA
160 mA
Integrated 36” (92 cm) cable, terminated with 6-pin Mini-DIN (PS/2 Style)
Typically <1 second for 97% of final value
100,000 Hours MTBF
| Categories | Title | Summary | File Size | Download |
|---|---|---|---|---|
| Data Sheets (PDF) | 50X_DS-50X 2405 A.pdf | Latest data sheet for the 50X Series | 2 MB |
McMillan S113 Flow Meters feature all-metal construction and are capable of measuring extremely low flow rates. Units are available that measure gases as low as 20 mL/min and as high as 10 L/min. Full scale accuracies of ± 3.0% are standard.
We are experts in all things flow. As a company founded and run by engineers, we seek to understand your application and then build a product solution that will solve your most difficult challenges.
McMillan Flow sales agents are strategically located across the
globe. Find your nearest distributor or office.
McMillan Company
7075 Ranch Rd 2338
Georgetown, TX 78633
sales@mcmflow.com
Phone: (844) MCM-FLOW
Copyright © 2024 McMillan Flow Products. All Rights Reserved.
McMillan Flow Products is located in the U.S.A. and all products are manufactured in our Texas plant.
"*" indicates required fields
