Select model:
U701 | U702 | U705 | U706


Model U701

McMillan Model U701 UHP FLO-SENSORS will precisely measure flow rates of virtually any fluid as low as 15 mL/minute or as high as 50 L/minute. Repeatable results are achieved by using a patented microturbine flow sensor design. This design, unlike traditional paddlewheel designs, provides accurate flow measurement with no particle generation. PTFE, perfluoroelastomers, and sapphire wetted parts ensure compatibility with chemicals commonly found in microelectronics manufacturing processes, including deionized water, CMP slurries, acids, solvents, and photoresist.

These UHP FLO-SENSORS integrate the sensing element with advanced electronics to provide output signals proportional to flow rate. Each unit is individually calibrated before shipment, and a certificate of calibration accompanies all FLO-SENSORS. A repeatability specification of ±0.2% full scale reassures process engineers of consistent results.

The Model U701 features a U-shaped space-saving flow path and pulse output.

Model U701 Features & Options

ACCURACY/LINEARITY

Pulse output models have an accuracy specification of ±3.0% full scale (including linearity).

CALIBRATION

All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.

DISPLAYS

McMillan has a comprehensive range of remote displays for use with UHP FLO-SENSORS. Please request further information from the factory.

ELECTRICAL CONNECTIONS

All units have an integrated FEP-jacketed cable terminated with pigtail leads.

FLOW PATH

U702 FLO-SENSORS feature a U-shaped flow path, which allows all fluid connections on one side of the unit to effectively reduce footprint.

FLOW RANGES

Flow ranges from 15-100 mLpm up to 5-50 Lpm are available. Consult the factory for custom requirements.

FLUID CONNECTIONS

All units have male Flaretek-compatible connections as standard. Nippon Pillar Super 300 or other non-standard connection types may be available upon request.

POWER

Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available.

SIGNAL OUTPUTS

The Model U701 features a pulse output, typically 0-400 Hz (consult calibration certificate for exact frequency output).

WETTED MATERIALS

All units have only PTFE, perfluoroelastomers, and sapphire as wetted parts.


Model U702

McMillan Model U702 UHP FLO-SENSORS will precisely measure flow rates of virtually any fluid as low as 15 mL/minute or as high as 50 L/minute. Repeatable results are achieved by using a patented microturbine flow sensor design. This design, unlike traditional paddlewheel designs, provides accurate flow measurement with no particle generation. PTFE, perfluoroelastomers, and sapphire wetted parts ensure compatibility with chemicals commonly found in microelectronics manufacturing processes, including deionized water, CMP slurries, acids, solvents, and photoresist.

These UHP FLO-SENSORS integrate the sensing element with advanced electronics to provide output signals proportional to flow rate. Each unit is individually calibrated before shipment, and a certificate of calibration accompanies all FLO-SENSORS. A repeatability specification of ±0.2% full scale reassures process engineers of consistent results.

The Model U702 features a U-shaped space-saving flow path and an analog output.

U702 Features & Options

ACCURACY/LINEARITY

Analog output models have an accuracy specification of ±1.0% full scale (including linearity).

CALIBRATION

All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.

DISPLAYS

McMillan has a comprehensive range of remote displays for use with UHP FLO-SENSORS. Please request further information from the factory.

ELECTRICAL CONNECTIONS

All units have an integrated FEP-jacketed cable terminated with pigtail leads.

FLOW PATH

U702 FLO-SENSORS feature a U-shaped flow path, which allows all fluid connections on one side of the unit to effectively reduce footprint.

FLOW RANGES

Flow ranges from 15-100 mLpm up to 5-50 Lpm are available. Consult the factory for custom requirements.

FLUID CONNECTIONS

All units have male Flaretek-compatible connections as standard. Nippon Pillar Super 300 or other non-standard connection types may be available upon request.

POWER

Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available.

SIGNAL OUTPUTS

Model U702 can be ordered with a 4-20 mA, 0-5 VDC, or 0-10 VDC output.

WETTED MATERIALS

All units have only PTFE, perfluoroelastomers, and sapphire as wetted parts.


Model U705

McMillan Model U705 UHP FLO-SENSORS will precisely measure flow rates of virtually any fluid as low as 15 mL/minute or as high as 50 L/minute. Repeatable results are achieved by using a patented microturbine flow sensor design. This design, unlike traditional paddlewheel designs, provides accurate flow measurement with no particle generation. PTFE, perfluoroelastomers, and sapphire wetted parts ensure compatibility with chemicals commonly found in microelectronics manufacturing processes, including deionized water, CMP slurries, acids, solvents, and photoresist.

These UHP FLO-SENSORS integrate the sensing element with advanced electronics to provide output signals proportional to flow rate. Each unit is individually calibrated before shipment, and a certificate of calibration accompanies all FLO-SENSORS. A repeatability specification of ±0.2% full scale reassures process engineers of consistent results.

The Model U705 features a straight flow path and a pulse output.

U705 Features & Options

ACCURACY/LINEARITY

Pulse output models have an accuracy specification of ±3.0% full scale (including linearity).

CALIBRATION

All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.

DISPLAYS

McMillan has a comprehensive range of remote displays for use with UHP FLO-SENSORS. Please request further information from the factory.

ELECTRICAL CONNECTIONS

All units have an integrated FEP-jacketed cable terminated with pigtail leads. FLOW PATH U705 FLO-SENSORS feature a straight flow path.

FLOW RANGES

Flow ranges from 15-100 mLpm up to 5-50 Lpm are available. Consult the factory for custom requirements.

FLUID CONNECTIONS

All units have male Flaretek-compatible connections as standard. Nippon Pillar Super 300 or other non-standard connection types may be available upon request.

POWER

Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available.

SIGNAL OUTPUTS

The Model U705 features a pulse output, typically 0-400 Hz (consult calibration certificate for exact frequency output).

WETTED MATERIALS

All units have only PTFE, perfluoroelastomers, and sapphire as wetted parts.


Model U706

McMillan Model U706 UHP FLO-SENSORS will precisely measure flow rates of virtually any fluid as low as 15 mL/minute or as high as 50 L/minute. Repeatable results are achieved by using a patented microturbine flow sensor design. This design, unlike traditional paddlewheel designs, provides accurate flow measurement with no particle generation. PTFE, perfluoroelastomers, and sapphire wetted parts ensure compatibility with chemicals commonly found in microelectronics manufacturing processes, including deionized water, CMP slurries, acids, solvents, and photoresist.

These UHP FLO-SENSORS integrate the sensing element with advanced electronics to provide output signals proportional to flow rate. Each unit is individually calibrated before shipment, and a certificate of calibration accompanies all FLO-SENSORS. A repeatability specification of ±0.2% full scale reassures process engineers of consistent results.

The Model U706 features a straight flow path and an analog output.

U706 Features & Options

ACCURACY/LINEARITY

Analog output models have an accuracy specification of ±1.0% full scale (including linearity).

CALIBRATION

All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.

DISPLAYS

McMillan has a comprehensive range of remote displays for use with UHP FLO-SENSORS. Please request further information from the factory.

ELECTRICAL CONNECTIONS

All units have an integrated FEP-jacketed cable terminated with pigtail leads. FLOW PATH

U706 FLO-SENSORS feature a straight flow path. FLOW RANGES

Flow ranges from 15-100 mLpm up to 5-50 Lpm are available. Consult the factory for custom requirements.

FLUID CONNECTIONS

All units have male Flaretek-compatible connections as standard. Nippon Pillar Super 300 or other non-standard connection types may be available upon request.

POWER

Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available.

SIGNAL OPTIONS

The Model U706 can be ordered with a 4-20 mA, 0-5 VDC, or 0-10 VDC output.

WETTED MATERIALS

All units have only PTFE, perfluoroelastomers, and sapphire as wetted parts.

 


Pressure Drop
Pressure Drop

 

Specifications


Accuracy (including linearity, best fit straight line):
Model U701: ±3.0% Full Scale
Model U702: ±1.0% Full Scale
Model U705: ±3.0% Full Scale
Model U706: ±1.0% Full Scale
Repeatability:
Model U701: ±0.20% Full Scale
Model U702: ±0.20% Full Scale
Model U705: ±0.20% Full Scale
Model U706: ±0.20% Full Scale
Pressure Rating:
Model U701: 80 psig (5.4 bar) working
100 psig (6.8 bar) overpressure
Model U702: 80 psig (5.4 bar) working
100 psig (6.8 bar) overpressure
Model U705: 80 psig (5.4 bar) working
100 psig (6.8 bar) overpressure
Model U706: 80 psig (5.4 bar) working
100 psig (6.8 bar) overpressure
Temperature Rating (Fluid):
Model U701: Standard: 0 to 55ºC
HT Suffix: 0 to 90ºC
Model U702: Standard: 0 to 55ºC
HT Suffix: 0 to 90ºC

Model U705: Standard: 0 to 55ºC
HT Suffix: 0 to 90ºC

Model U706: Standard: 0 to 55ºC
HT Suffix: 0 to 90ºC
Temperature Rating (Environment):
Model U701: Operating: 0 to 50ºC
Storage: 0 to 70ºC
Model U702: Operating: 0 to 50ºC
Storage: 0 to 70ºC
Model U705: Operating: 0 to 50ºC
Storage: 0 to 70ºC
Model U706: Operating: 0 to 50ºC
Storage: 0 to 70ºC
Wetted Materials:
Model U701: PTFE
Sapphire
Model U702: PTFE
Sapphire
Model U705: PTFE
Sapphire
Model U706: PTFE
Sapphire
Exterior Surfaces:
Model U701: PTFE
Polypropylene
Epoxy
Viton
Polyester
Model U702: PTFE
Polypropylene
Epoxy
Viton
Polyester
Model U705: PTFE
Polypropylene
Epoxy
Viton
Polyester
Model U706: PTFE
Polypropylene
Epoxy
Viton
Polyester
O-Ring Material:
Model U701: Perfluoroelastomer;
Contact factory for current compound.
Model U702: Perfluoroelastomer;
Contact factory for current compound.
Model U705: Perfluoroelastomer;
Contact factory for current compound.
Model U706: Perfluoroelastomer;
Contact factory for current compound.
Recommended Filtration:
Model U701: 20 microns or less
Model U702: 20 microns or less
Model U705: 20 microns or less
Model U706: 20 microns or less
Compatible Liquids:
Model U701: Low viscosity (<10 cS recommended)
Translucent or transparent
Minimum amount of entrained air
Model U702: Low viscosity (<10 cS recommended)
Minimum amount of entrained air
Model U705: Low viscosity (<10 cS recommended)
Minimum amount of entrained air
Translucent or transparent
Model U706: Low viscosity (<10 cS recommended)
Minimum amount of entrained air
Warm-Up Time:
Model U701: None Model U702: None Model U705: None Model U706: None
Zero Drift:
Model U701: None Model U702: None Model U705: None Model U706: None
Calibration Interval:
Model U701: Calibration should typically be verified once every 12 months
Model U702: Calibration should typically be verified once every 12 months
Model U705: Calibration should typically be verified once every 12 months
Model U706: Calibration should typically be verified once every 12 months
Power Requirements:
Model U701: 12-15 VDC Units: 12-15 VDC, 50 mA typical
15-25 VDC Units: 15-25 VDC, 75 mA typical
22-25 VDC Units: 22-25 VDC, 50 mA typical
Model U702: 12-15 VDC Units: 12-15 VDC, 50 mA typical
15-25 VDC Units: 15-25 VDC, 75 mA typical
22-25 VDC Units: 22-25 VDC, 50 mA typical
Model U705: 12-15 VDC Units: 12-15 VDC, 50 mA typical
15-25 VDC Units: 15-25 VDC, 75 mA typical
22-25 VDC Units: 22-25 VDC, 50 mA typical
Model U706: 12-15 VDC Units: 12-15 VDC, 50 mA typical
15-25 VDC Units: 15-25 VDC, 75 mA typical
22-25 VDC Units: 22-25 VDC, 50 mA typical
Electrical Connections:
Model U701: Integrated FEP-jacketed cable with pigtail leads
Model U702: Integrated FEP-jacketed cable with pigtail leads
Model U705: Integrated FEP-jacketed cable with pigtail leads
Model U706: Integrated FEP-jacketed cable with pigtail leads
Typical Response Time:
Model U701: Typically <300 milliseconds for 97% of final value
Model U702: Typically <1 second for 97% of final value
Model U705: Typically <300 milliseconds for 97% of final value
Model U706: Typically <1 second for 97% of final value
Reliability:
Model U701: 100,000 Hours MTBF
Model U702: 100,000 Hours MTBF
Model U705: 100,000 Hours MTBF
Model U706: 100,000 Hours MTBF
Approvals/Certifications:
Model U701: CE Approved 89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage Directive
Model U702: CE Approved 89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage Directive
Model U705: CE Approved 89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage Directive
Model U706: CE Approved 89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage Directive
Ratings:
Model U701: IP53 (NEMA 2)
Model U702: IP53 (NEMA 2)
Model U705: IP53 (NEMA 2)
Model U706: IP53 (NEMA 2)
Pulse Output:
Model U701: Square-wave
Passive BOSFET
Opto-Isolated up to 2500 V
0-400 Hz typical
Model U705: Square-wave
Passive BOSFET
Opto-Isolated up to 2500 V
0-400 Hz typical
0-10 VDC Output:
Model U702: Optional
0 VDC at zero flow
5 Kohm or greater output load
Not isolated
Model U706: Optional
0 VDC at zero flow
5 Kohm or greater output load
Not isolated
4-20 mA Output:
Model U702: Optional
4 mA at zero flow
500 ohm maximum loop resistance
Not isolated
Model U706: Optional
4 mA at zero flow
500 ohm maximum loop resistance
Not isolated
0-5 VDC Output:
Model U702: Optional
0 VDC at zero flow
2.5 Kohm or greater output load
Not isolated
Model U706: Optional
0 VDC at zero flow
2.5 Kohm or greater output load
Not isolated
Category
Description
File Size
File Name
MANUALS
Model U701/U702/U705/U706 Instruction Manual
729.9 KB
TECH BULLETINS
UHP Components Prepared by Acid Leaching
319.9 KB
TECH BULLETINS
Connections for the Model 106 with Pulse Output
110.4 KB
TECH BULLETINS
Microturbine FLO-SENSORS Replacing Rotameters for Over 20 Years
149.6 KB
TECH BULLETINS
UHP FLO-SENSOR Purity Analysis
98.5 KB
TECH BULLETINS
Model 106 4-20 mA Output Wiring Diagram
67.2 KB
DATA SHEETS
U701/U702/U705/U706 Data Sheet
2.1 MB
CATALOGS
UHP Product Short Form Catalog
1.5 MB
WARRANTIES
UHP Product Limited Warranty
67.3 KB