Select model:
U707 | U708


Model U707

McMillan Model U707 UHP FLO-SENSORS will precisely measure flow rates of virtually any fluid as low as 15 mL/minute or as high as 10 L/minute. Repeatable results are achieved by using a patented microturbine flow sensor design. This design, unlike traditional paddlewheel designs, provides accurate flow measurement with no particle generation. PTFE, perfluoroelastomers, and sapphire wetted parts ensure compatibility with chemicals commonly found in microelectronics manufacturing processes, including deionized water, CMP slurries, acids, solvents, and photoresist.

These UHP FLO-SENSORS integrate the sensing element with advanced electronics to provide output signals proportional to flow rate. Each unit is individually calibrated before shipment, and a certificate of calibration accompanies all FLO-SENSORS. A repeatability specification of ±0.2% full scale reassures process engineers of consistent results.

The Model U707 features a compact footprint-reducing design and a pulse output.

Model U707 Features & Options

ACCURACY/LINEARITY

Pulse output models have an accuracy specification of ±3.0% full scale (including linearity).

CALIBRATION

All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.

DISPLAYS

McMillan has a comprehensive range of remote displays for use with UHP FLO-SENSORS. Please request further information from the factory.

ELECTRICAL CONNECTIONS

All units have an integrated 7-pin connector. Several mating cable options are available.

FLOW RANGES

Flow ranges from 15-100 mL/minute up to 1,000-10,000 mL/minute are available. Consult the factory for custom requirements.

FLUID CONNECTIONS

All units have male Flaretek- compatible connections. Non-standard connection types may be available upon request.

GANGS OF MULTIPLE UNITS

To reduce overall footprint in multiple-channel applications, McMillan can assemble custom gangs of U707/U708 FLO-SENSORS and assign a custom part number for the entire assembly. Please request details from the factory.

POWER

Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available for use with 12 VDC versions.

SIGNAL OUTPUTS

The Model U707 features a pulse output, typically 0-400 Hz (consult calibration certificate for exact frequency output).

WETTED MATERIALS

All units have only PTFE, perfluoroelastomers, and sapphire as wetted parts.


Model U708

McMillan Model U708 UHP FLO-SENSORS will precisely measure flow rates of virtually any fluid as low as 15 mL/minute or as high as 10 L/minute. Repeatable results are achieved by using a patented microturbine flow sensor design. This design, unlike traditional paddlewheel designs, provides accurate flow measurement with no particle generation. PTFE, perfluoroelastomers, and sapphire wetted parts ensure compatibility with chemicals commonly found in microelectronics manufacturing processes, including deionized water, CMP slurries, acids, solvents, and photoresist.

These UHP FLO-SENSORS integrate the sensing element with advanced electronics to provide output signals proportional to flow rate. Each unit is individually calibrated before shipment, and a certificate of calibration accompanies all FLO-SENSORS. A repeatability specification of ±0.2% full scale reassures process engineers of consistent results.

The Model U708 features a compact footprint-reducing design and an analog output.

U708 Features & Options

ACCURACY/LINEARITY

Analog output models have an accuracy specification of ±1.0% full scale (including linearity).

CALIBRATION

All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.

DISPLAYS

McMillan has a comprehensive range of remote displays for use with UHP FLO-SENSORS. Please request further information from the factory.

ELECTRICAL CONNECTIONS

All units have an integrated 7-pin connector. Several mating cable options are available.

FLOW RANGES

Flow ranges from 15-100 mL/minute up to 1,000-10,000 mL/minute are available. Consult the factory for custom requirements.

FLUID CONNECTIONS

All units have male Flaretek- compatible connections. Non-standard connection types may be available upon request.

GANGS OF MULTIPLE UNITS

To reduce overall footprint in multiple-channel applications, McMillan can assemble custom gangs of U708 FLO-SENSORS and assign a custom part number for the entire assembly. Please request details from the factory.

POWER

Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available for use with 12 VDC versions.

SIGNAL OUTPUTS

The Model U708 can be ordered with either a 4-20 mA, 0-5 VDC, or 0-10 VDC output.

WETTED MATERIALS

All units have only PTFE, perfluoroelastomers, and sapphire as wetted parts.


 

Pressure Drop
Pressure Drop

Specifications


Accuracy (including linearity, best fit straight line):
Model U707: ±3.0% Full Scale
Model U708: ±1.0% Full Scale
Repeatability:
Model U707: ±0.2% Full Scale
Model U708: ±0.2% Full Scale
Pressure Rating:
Model U707: 80 psig (5.4 bar) working
100 psig (6.8 bar) overpressure
Model U708: 80 psig (5.4 bar) working
100 psig (6.8 bar) overpressure
Temperature Rating (Fluid):
Model U707: Standard: 0 to 55ºC
HT suffix: 0 to 90ºC
Model U708: Standard: 0 to 55ºC
HT suffix: 0 to 90ºC
Temperature Rating (Environment):
Model U707: Operating: 0 to 50ºC
Storage: 0 to 70ºC
Model U708: Operating: 0 to 50ºC
Storage: 0 to 70ºC
Wetted Materials:
Model U707: PTFE
Sapphire
Model U708: PTFE
Sapphire
Exterior Surfaces:
Model U707: PTFE
Polypropylene
Epoxy
Viton
Polyester
Model U708: PTFE
Polypropylene
Epoxy
Viton
Polyester
O-Ring Material:
Model U707: Perfluoroelastomer (contact factory for current compound)
Model U708: Perfluoroelastomer (contact factory for current compound)
Recommended Filtration:
Model U707: 20 microns or less
Model U708: 20 microns or less
Compatible Liquids:
Model U707: Low viscosity (<10 cS)
Translucent or transparent
Minimum amount of entrained air
Model U708: Low viscosity (<10 cS)
Translucent or transparent
Minimum amount of entrained air
Warm-Up Time:
Model U707: None Model U708: None
Zero Drift:
Model U707: None Model U708: None
Calibration Interval:
Model U707: Calibration should typically be verified once every 12 months
Model U708: Calibration should typically be verified once every 12 months
Power Requirements:
Model U707: 12-15 VDC: 12-15 VDC, 50 mA typical
22-25 VDC units: 22-25 VDC, 50 mA typical
Model U708: 12-15 VDC: 12-15 VDC, 50 mA typical
15-25 VDC Units: 15-25 VDC, 75 mA typical
22-25 VDC units: 22-25 VDC, 50 mA typica
Electrical Connections:
Model U707: 7-pin connector
PTFE housing when used with CFx cables
Nylon housing when used with CPx cables
Model U708: 7-pin connector
PTFE housing when used with CFx cables
Nylon housing when used with CPx cables
Typical Response Time:
Model U707: Typically <300 milliseconds for 97% of final value
Model U708: Typically <1 second for 97% of final value
Reliability:
Model U707: 100,000 Hours MTBF (testing ongoing)
Model U708: 100,000 Hours MTBF (testing ongoing)
Approvals/Certifications:
Model U707: CE Approved
89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage Directive
Model U708: CE Approved
89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage Directive
Ratings:
Model U707: IP64 (NEMA 4X)
Model U708: IP64 (NEMA 4X)
Pulse Output:
Model U707: Square-wave
Collector output
Pulls up to V+
0-10 VDC Output:
Model U708: Optional
0 VDC at zero flow
5 Kohm or greater output load
Not isolated
4-20 mA Output:
Model U708: Optional
4 mA at zero flow
500 ohm maximum current loop
Not isolated
0-5 VDC Output:
Model U708: Optional
0 VDC at zero flow
2.5 Kohm or greater output load
Not isolated
Category
Description
File Size
File Name
MANUALS
Model U707/U708 Instruction Manual
152.7 KB
TECH BULLETINS
UHP Components Prepared by Acid Leaching
319.9 KB
TECH BULLETINS
Microturbine FLO-SENSORS Replacing Rotameters for Over 20 Years
149.6 KB
TECH BULLETINS
UHP FLO-SENSOR Purity Analysis
98.5 KB
DATA SHEETS
U707/U708 Data Sheet
1.9 MB
CATALOGS
UHP Product Short Form Catalog
1.5 MB
WARRANTIES
UHP Product Limited Warranty
67.3 KB