McMillan S113 Flow Meters feature all-metal construction and are capable of measuring extremely low flow rates. Units are available that measure gases as low as 20 mL/min and as high as 10 L/min. Full scale accuracies of ± 3.0% are standard.
McMillan S113 Flow Meters feature all-metal construction and are capable of measuring extremely low flow rates. Units are available that measure gases as low as 20 mL/min and as high as 10 L/min. Full scale accuracies of ± 3.0% are standard. Repeatable results are achieved using a Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well-deserved reputation for continuous operational service or many years without failure.
Because of the compact size and affordable cost of these products, the S Series flow meters are suitable for a wide variety of industrial, commercial, laboratory and OEM applications. Some sample applications include measurement of hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, acids, alkalis, and deionized water.
Several body types are available, including both plastic and metal. NIST Traceable certificates are available on all models. A backlit LCD display is integrated into each unit and is programmed to read in mL/min or L/min.
Units are available that measure gas flow as low as 20 mL/min and as high as 10 L/min.
Most units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are also available for use with 12 VDC versions.
S113 units come with a 0-5 VDC output.
All S113 units have a standard accuracy specification of ± 3% full scale including linearity. NIST traceable calibration certificates are optional.
Units feature compression tube fittings. Fitting sizes may be selected as noted in the Product Configurator.
Units have an integrated 4-pin male connector. To complete connections, either a cable assembly or power adapter should be ordered.
A flow rate display is integrated into each unit and is programmed to read in mL/min for ranges 3-6, and L/min for flow ranges 7-9.
±3.0% Full Scale
±0.5% Full Scale
40 psig (2.7 barg)
Operating Range: 5 - 55ºC
Storage Range: 0 - 70ºC
±0.2% F.S. or less per ºC
Brass
PPS
304 SS
Epoxy
Glass
Sapphire
FKM
25 microns or less
Non-condensing, non-corrosive gases
Non-isolated, 2500 ohm minimum load
12 VDC units: 11.5 - 15 VDC @ 35 mA
24 VDC units : 22 - 25 VDC @ 35 mA
Typically <30 seconds to 67% of final value
CE Approved
89 / 336 / EEC (EN 55011 & EN 50082-1)
73 / 23 / EEC Low Voltage Directive
UKCA
IP10 (NEMA 1)
128x32 pixel backlit LCD
| Categories | Title | Summary | File Size | Download |
|---|
We are experts in all things flow. As a company founded and run by engineers, we seek to understand your application and then build a product solution that will solve your most difficult challenges.
McMillan Flow sales agents are strategically located across the
globe. Find your nearest distributor or office.
McMillan Company
7075 Ranch Rd 2338
Georgetown, TX 78633
sales@mcmflow.com
Phone: (844) MCM-FLOW
Copyright © 2024 McMillan Flow Products. All Rights Reserved.
McMillan Flow Products is located in the U.S.A. and all products are manufactured in our Texas plant.
"*" indicates required fields
